mu sc fc harsh environment attenuators terminators 47 fc type fiber optic connectors hrfc series features 1. jis, iec standards compliantand and fully intermateable with ntt's fc products. jic c 5970 (f01 type fiber optic connectors). iec 61754-13 2. two types of plug frames conventional cutout key ring types and molded key ring types are available. important notice plug key width : 2.1mm adapter key width : 2.2mm applications public communications lines, catv, test equipment, etc. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
48 mu sc fc harsh environment attenuators terminators optical characteristics mechanical characteristics environmental characteristics part material plug housing brass, stainless steel or zinc alloy spring stainless steel ferrule zirconia adapter brass split sleeve copper alloy receptacle brass attenuator housing stainless steel product specifications ratings operating temperature range -25? to +70? (sm) (gi) storage temperature range -25? to +70? materials item test method (iec 61300) specifications insertion loss wavelength 1310nm (ld) 0.5db max. (pc, adpc, apc) wavelength 1310nm (led) 0.3db max. (pc) return loss wavelength 1310nm (ld) 22db min.(pc) 40db min.(adpc) 60db min. (apc) 22db min. (pc) ferrule withdrawal extract zirconia gauge 2.499 ?.0005 mm copper alloy split sleeve 2n to 5.9n dia from split sleeve. zirconia split sleeve 2n to 3.9n cable retention 1) insertion loss fluctuation after test: 0.2db max. (straight pull) 2) no visible damage, dislocation of clamp or cable. durability 1000 times (cycles, mating/un-mating) vibration shock humidity -10? to 65?, humidity: 90% to 96% 20 cycles (temperature/ humidity- cycles) change of temperature -40? to +70? 42 cycles (complies with telcordia standard gr-326-core) dry heat 960 hours at 85? cold 960 hours at -25? salt mist 48 hours in a 5% concentration of salt mist no significant corrosion. frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 axis. 98n tensile load for minute. acceleration of 981 m/s 2 , 6 ms duration, sin half-wave waveform, 10 cycles in each of the 3 axis. 1) insertion loss fluctuation after test: 0.2db max. 2) no visible damage, cracks or part dislocation. (sm) (gi) the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
49 mu sc fc harsh environment attenuators terminators fc products plug housing key width 2.1mm cutout keying ring type for 2 mm cable, molded keying ring type for 3 mm cable, molded keying ring type for 0.9 mm fiber, molded keying ring type single mode multi mode solid body type flange type single mode gi fc to sc cutout keying ring type cutout keying ring type standard type round type fc to sc single mode ferrule adapter key width 2.2mm conversion adapter receptacle dust cap attenuator terminator hrfc-type connector fixed type variable type the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
50 mu sc fc harsh environment attenuators terminators molded keying ring type (key width 2.1mm) for 2mm cable part number cl no. boot color polishing type hrfc-p8-h2(21) 701-0075-3-21 blue pc hrfc-p8-l2(21) 701-0077-9-21 light purple adpc hrfc-p8-g2(21) 701-2001-8-21 green apc for 3mm cable part number cl no. boot color polishing type hrfc-p8-h3(21) 701-0074-0-21 blue pc hrfc-p8-l3(21) 701-0078-1-21 light purple adpc hrfc-p8-g3(21) 701-2002-0-21 green apc part number cl no. boot color polishing type hrfc-p15-h(21) 701-0114-3-21 blue pc hrfc-p15-l(21) 701-0115-6-21 light purple adpc hrfc-p15-g(21) 701-2004-6-21 green apc for 0.9mm fiber ?10 m80.75 52.8 ?10 m80.75 52.8 ?10 m80.75 30.8 704-0287-0 hsc-t3 hrfc-p8-h2,l2,g2, hrfc-p8-h3,l3,g3, tool crimp tool part number cl no. applicable connector (1)2mm jacket crimping: section a 3mm jacket crimping: section c (2)kevlar tm crimping: section b the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
51 mu sc fc harsh environment attenuators terminators cutout keying ring type (key width 2.1mm) for 3mm cable for 2mm cable for 0.9mm fiber part number clno. hrfc-p1-h 701-0001-7 part number cl no. hrfc-p1-h(04) 701-0001-7-04 part number cl no. hrfc-p6-h 701-0041-1 ?10 m80.75 37.8 ?10 m80.75 37.8 ?10 m80.75 27.8 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
52 mu sc fc harsh environment attenuators terminators adapters (key width 2.2mm) solid body type standard body type flange type round type part number cl no mark split sleeve remarks hrfc-pa1-g1(02) 701-0014-9-02 fc-ap copper alloy hrfc-pa1-d1 (02) 701-0089-8 -02 fc-a a zirconia (note) part number cl no. split sleeve remarks hrfc-pa4-g1 701-0068-8 copper alloy hrfc-pa4-d1 701-0112-8 zirconia (note) part number cl no. split sleeve remarks hrfc-a2-sf(01) 701-0039-0-01 copper alloy hrfc-a2-sf-d1 ----- zirconia (note) part number cl no. split sleeve remarks hrfc-pa11-g1 701-0071-2 copper alloy hrfc-pa11-d1 701-0106-5 zirconia (note) ?9 +0.5 0 13.40.1 2--m20.4 or 2--?2.4 +0.2 0 fc-a 9.5 15 ?2.2 4 15 2--m80.75 ?4 countersink depth 1.5 ?9 +0.5 0 13.40.1 2--m20.4 or 2--?2.4 +0.2 0 ?19 13.45 2- ?2.2 2 15 2--m80.75 2--?4 countersink depth 1.5 ?8 15 2_m80.75 b panel cutout b panel cutout b panel cutout fc-a 4 15 9.5 15 9.5 15 ? 2.2 m80.75 m80.75 ?4 countersink depth 1.5 note:please take utmost care when inserting fc plug into a fc adapter. when applying excessive force to the fc plug or inserting in an odd angle, the zirconia sleeve within the adapter might be dameged. note:please take utmost care when inserting fc plug into a fc adapter. when applying excessive force to the fc plug or inserting in an odd angle, the zirconia sleeve within the adapter might be dameged. note:please take utmost care when inserting fc plug into a fc adapter. when applying excessive force to the fc plug or inserting in an odd angle, the zirconia sleeve within the adapter might be dameged. note:please take utmost care when inserting fc plug into a fc adapter. when applying excessive force to the fc plug or inserting in an odd angle, the zirconia sleeve within the adapter might be dameged. ? 9 +0.5 0 13.4 0.1 board thiekness : 16mm board thiekness : 16mm +0.2 0 2-m2 0.4 or 2- ? 2.4 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
53 mu sc fc harsh environment attenuators terminators conversion adapters fc / sc fc / sc receptacle part number cl no. split sleeve hscj-hrfcj-b(51) 704-0021-3-51 copper alloy part number hrs no. remarks hrfc-r1 701-0016-4 mm hrfc-r2 701-0023-0 sm b panel cutout 15 2--m80.75 ?9 +0.5 0 13.40.1 2--m20.4 13.4 9 12.8 ?19 21.2 5.5 12.2 3.5 or 2--?2.4 +0.2 0 fc-r m80.75 5.5 m 9.5 m 15 4- ?2.2 3 9 ?4 countersink depth 1.5 9.50.1 ?9 +0.5 0 4--m20.4 or 4--?2.4 +0.2 0 b panel cutout fc / sc m80.75 27.9 21 ( 1.8 ) 9 12.8 7.4 9.4 cl no. part number polishing type fiber type 704-0203-0-51 hscp-hrfcj-1 ( 51 ) pc gi-50/125 704-0288-3-51 hscp-hrfcj-1as ( 51 ) adpc 704-0204-3-51 hscp-hrfcj-2 ( 51 ) pc sm-9.5/125 704-0289-6-51 hscp-hrfcj-2as ( 51 ) adpc split sleeve copper alloy cl no. part number polishing type fiber type 701-0065-0-51 hrfcp-hscj-1(51) pc gi-50/125 701-0108-0-51 hrfcp-hscj-1as(51) adpc 701-0085-7-51 hrfcp-hscj-2(51) pc sm-9.5/125 701-0109-3-51 hrfcp-hscj-2as(51) adpc split sleeve copper alloy 9.15 7.4 13.7 15 32 (3.9) 12.8 9 ?19 hhh the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
54 mu sc fc harsh environment attenuators terminators part number cl no. hrfc-c1 701-0019-2 ferrule dust cap same as sc ferrules refer to page 33 for details. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
|
